Skip to content

HomeServicesOpener Repair & Installation

Garage door openers

Garage Door Opener Repair & Installation in Rapid City, SD

If your opener hums but will not lift, your remote stopped working or the door keeps reversing, we diagnose the problem and repair it. When an opener has reached the end of its life, we can install a new one.

Garage door opener with built-in lights mounted on the ceiling

The service

Opener repair and replacement

The motor that does the lifting, and the controls that tell it when.

A garage door opener drives the door up and down along a rail. It works with the springs, which do most of the lifting, and with safety sensors near the floor that stop the door if something is in the way.

Openers can fail for many reasons: worn gears, a faulty logic board, sensors out of line, a broken wall button, or remotes and keypads that have lost their programming. Sometimes the opener is fine and the real problem is a spring or cable on the door.

We check the opener and the door together, explain what is wrong, and repair it. If replacement makes more sense, we talk you through the options and install the new opener.

Common problems

Signs your opener needs attention

Common opener complaints.

Motor runs but door does not move

The opener hums or clicks without lifting.

Door reverses before closing

It goes down, then back up.

Remote or keypad stopped working

The wall button works but the remote does not.

Loud grinding from the opener

Unusual noise from the motor unit.

Door stops partway

It opens or closes only part of the way.

Opener does nothing

No lights and no sound when pressed.

What we do

Opener services

Repairs and new installations.

Opener repair

Diagnosis and repair of the motor unit, drive and controls.

Sensor alignment

Safety sensors cleaned, aligned and tested.

Remotes and keypads

Remotes and keypads programmed or replaced.

New opener installation

A new opener installed, set up and tested with your door.

How it works

Our opener service process

A typical opener visit follows four steps.

1

Check the door

Make sure the springs and cables are working first.

2

Diagnose the opener

Test the motor, sensors, remotes and wall controls.

3

Repair or install

Fix the opener, or fit a new one if that is the better option.

4

Set up and test

Adjust the limits and force, and test the safety reverse.

Garage door opener motor unit and rail
Ceiling-mounted garage door opener with lights

FAQ

Opener questions

What people ask most about garage door openers.

Why does my garage door go down and then back up?

This is often the safety sensors. If they are dirty, knocked out of line or blocked, the opener reverses the door. It can also be the opener force or limit settings, or a problem with the door itself.

My opener runs but the door will not open. What is wrong?

It could be a broken spring, which leaves the door too heavy to lift, or a problem inside the opener such as a stripped gear. Do not keep running the opener. Call us so the door and opener can be checked.

Can you program my remotes and keypad?

Yes. We can program remotes and keypads to your opener, or replace them if they are faulty.

Should I repair or replace my opener?

If the repair is simple, repair usually makes sense. If the opener is old, noisy or keeps failing, a new one may be the better choice. We explain the options so you can decide.

Related services

Related repairs

Problems that often show up alongside opener trouble.

Spring Repair

A broken spring can stop the opener lifting.

Garage Door Repair

All garage door problems.

Garage Door Installation

New garage doors.

Emergency Repair

Door stuck open or shut.

Opener giving you trouble?

Call Door Service or send a request with a short description.