Skip to content

HomeServicesGarage Door RepairCable & Roller Repair

Garage door repair

Garage Door Cable, Roller & Off-Track Repair in Rapid City, SD

A frayed cable, worn rollers or a bent track can leave your door crooked, noisy or hanging out of its track. We repair the parts that guide and lift the door so it runs straight and smooth.

Garage door tracks, rollers and opener rail

The service

How cables, rollers and tracks work

The parts that lift and guide the door.

Lift cables run from the bottom corners of the door to drums at the top. Together with the springs, they raise and lower the door evenly on both sides.

Rollers sit in the edges of each panel and run inside the vertical and horizontal tracks. They keep the door lined up as it moves.

When a cable frays or snaps, a roller wears out, or a track gets bent, the door can tilt, bind, grind or come out of the track altogether. Fixing the cause keeps the door safe and stops further damage.

Common problems

Signs of cable, roller or track problems

If your door does any of these, these parts should be checked.

Door hangs crooked

One side sits lower than the other.

Loose or frayed cable

A cable is hanging slack or has broken strands.

Rollers out of the track

The door has jumped the track or is twisted.

Grinding or squeaking

Noisy, uneven movement as the door runs.

Bent or dented track

The door catches or stops at the same point.

Door shakes or jerks

It does not move smoothly up and down.

Repair solutions

How these problems get fixed

What the repair usually involves.

Cable replacement

Frayed or broken lift cables replaced and set evenly on both drums.

Roller replacement

Worn or broken rollers swapped for new ones for quieter movement.

Track realignment

Tracks straightened, aligned and secured.

Off-track repair

The door put back on its tracks and the cause fixed.

Safety first

If your door is off its track

What to do and what not to do.

A door that is off its track or has a broken cable can be unstable and may fall. Do not try to close it with the opener or pull it back into place by hand.

Leave the door where it is, keep people and cars clear of it, and call us so it can be secured and repaired safely.

How it works

Our repair process

A typical cable or roller repair follows four steps.

1

Secure the door

Make the door safe before any work starts.

2

Inspect

Check cables, drums, rollers, tracks and springs.

3

Repair

Replace or realign the damaged parts.

4

Test

Run the door to check it is level, quiet and smooth.

Garage door with windows running in its tracks
Inside view of a garage door, tracks and opener

FAQ

Cable, roller and track questions

What people ask most about these repairs.

Why does my garage door hang crooked?

A crooked door usually means a lift cable has slipped, frayed or broken, or a spring problem is pulling one side more than the other. It should not be used until it is checked.

Can a door that came off its track be fixed?

Usually, yes. The door is secured, put back in the tracks and the cause, such as a worn roller, bent track or broken cable, is repaired. Badly damaged panels may need more work, which we will explain.

How do I know if my rollers are worn?

Worn rollers often cause grinding, rattling or squeaking, and the door may shake as it moves. Rollers with chipped wheels or wobbling stems should be replaced.

Is a frayed cable dangerous?

Yes. A frayed cable can snap without warning and drop one side of the door. If you see broken strands, stop using the door and call us.

Related services

Related repairs

Problems that often show up together.

Spring Repair

Springs work hand in hand with the cables.

Garage Door Repair

All garage door problems.

Opener Repair & Installation

Openers, remotes and sensors.

Emergency Repair

Doors stuck open or unsafe.

Door crooked or off its track?

Leave it where it is and call Door Service.