Garage door repair
Garage Door Spring Repair in Rapid City, SD
If you heard a loud bang and now the door will not lift, a spring has probably broken. Springs are under high tension, so replacement should be left to a garage door technician.

The service
What garage door springs do
The springs carry the weight of the door, not the opener.
A garage door is heavy. The springs counterbalance that weight so the door can be lifted by hand or by the opener. Most homes have torsion springs on a bar above the door, while some older or lighter doors use extension springs along the tracks.
Springs are rated for a limited number of open-and-close cycles. Over time the steel tires and eventually snaps, often with a sound like a gunshot. Once a spring breaks, the door becomes very heavy and the opener may not be able to lift it.
Spring repair means replacing the broken spring, usually with one matched to the weight and size of your door, and setting the tension so the door is balanced again.
Common problems
Signs of a broken or worn spring
If you notice any of these, the springs are the first thing to check.
A loud bang from the garage
Often the moment a spring snaps.
Door will not lift
The opener strains or the door only rises a few inches.
Visible gap in the spring
A torsion spring split into two pieces on the bar.
Door feels very heavy
It is hard to lift by hand with the opener released.
Door closes too fast
It drops instead of lowering slowly.
Crooked or jerky movement
One side rises before the other.
Repair solutions
How spring problems get fixed
What a spring repair usually involves.
Spring replacement
Broken springs replaced with springs suited to your door.
Tension setting
Springs set so the door is balanced and stays put when half open.
Cable and drum check
Cables and drums checked, since they work with the springs.
Safety test
The door and opener tested together, including the auto-reverse.
Safety first
Please do not try to fix springs yourself
Why spring work should be left to a technician.
Garage door springs store a large amount of energy. Trying to adjust, unwind or replace them without the right tools and training can cause serious injury.
If you think a spring has broken, do not keep pressing the opener button and do not try to lift the door by force. Keep people and pets away from the door and call us.
How it works
Our spring repair process
A typical spring repair follows four steps.
1
Inspect
Confirm which spring has failed and check the cables and drums.
2
Release tension
Safely secure the door and release any remaining tension.
3
Replace
Fit the replacement spring or springs.
4
Balance and test
Set the tension and test the door by hand and with the opener.


FAQ
Spring repair questions
What people ask most about garage door springs.
Can I open my garage door with a broken spring?
It is best not to. Without a working spring the door is extremely heavy and can drop suddenly. Running the opener can also damage it. If your car is stuck inside, call us and explain the situation.
Should both springs be replaced at the same time?
On doors with two springs, they usually have the same age and wear. When one breaks, the other is often close behind, so replacing both is often recommended. We will explain what we find on your door.
What is the difference between torsion and extension springs?
Torsion springs sit on a metal bar above the door and twist to lift it. Extension springs run along the horizontal tracks and stretch. Both store a lot of tension and should be replaced by a technician.
Why did my spring break?
Springs wear out with use. Each open and close is one cycle, and every spring is made for a limited number of cycles. Rust and a door that is out of balance can shorten that life.
Related services
Related repairs
Problems that often show up alongside a broken spring.
Heard a loud bang from the garage?
Do not force the door. Call Door Service and describe what happened.